Makita 2040 12OV, 5 0 f t, 150 ft, Ampere Rating, 5011, 100 ft, 200 ft, 2 5 f t, 1 0 0 f t

		Volts		Total length of cord in feet
		12OV	2 5 f t .	5 0 f t .	1 0 0 f t .	150 ft.
Ampere Rating		2 4 0 V	5011.	100 ft.	200 ft.	300 ft.
	Not			AWG
More Than	More Than
0	6		1 8	16	16	14
6	10		18	16	14	1 2
10	12		16	16	14	1 2
1 2	16		14	12	Not Recommende

I'Only the applicable parts of the Table need to be included. For instance. a 120-volt product need no include the 240-volt headina.

17.REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch in off position before plugging in.

18.USE RECOMMENDED ACCESSORIES. Consult the owner's manual fc recommended accessories. The use of improper accessories may cause ris of injury t o persons.

19.NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped c if the cutting tool is accidentally contacted.

20.CHECK DAMAGED PARTS. Before further use of the tool, a guard or otht

part that is damaged should be carefully checked t o determine that it wi operate properly and perform its intended function - check for alignmer of moving parts, binding of moving parts, breakage of parts, mounting, an any other.conditions that may affect its operation. A guard or other part thc is damaged should be properly repaired or replaced.

21.DIRECTION OF FEED. Feed work into a blade or cutter against the directio of rotation of the blade or cutter only.

22.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don leave tool until it comes t o a complete stop.

23.PROPER GROUNDING. This tool should be grounded while in use to protec the operator from electric shock.

24.EXTENSION CORDS: Use only three-wire extension cords which have threr prong grounding-type plugs and three-pole receptacles which accept th tool's plug. Replace or repair damaged or worn cord immediately.

I