3LTAGE WARNING: Before connecting the tool t o a power source (receptacle, Itlet, etc.) be sure the voltage supplied is the same as that specified on the meplate of the tool. A power source with voltage greater than that specified )r the tool can result in SERIOUS INJURY t o the user - as well as damage t o le tool. I f in doubt, DO NOT PLUG IN THE TOOL. Using a power source with oltage less than the nameplate rating is harmful t o the motor.
;ROUNDING INSTRUCTIONS
\LL GROUNDED, CORD-CONNECTEDTOOLS: In the event of a malfunction or Breakdown, giounding provides a path of least resistance for electric current t o educe the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be ilugged into a matching outlet that is properly installed and grounded in ac- zordance with all local codes and ordinances.
Do not modify the plug provided-if it will not fit the outlet, have the proper outlet installed by a qualified electrician.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green w i t h or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor t o a live terminal.
Check w i t h a qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.
This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in Figure A. The tool has a grounding plugthat looks like the plug illustrated in Figure A. A temporary adapter, which looks like the adapter illustrated in Figure B and C, may be used to connect this plug t o a 2-pole receptacle as shown in Figure B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. The green-colored rigid ear, lug, etc. extending from the adapter must be connected t o a permanent ground such as a properly grounded outlet box.
GROUNDING METHODS
Groundibg Pin | Grounding |
| Munl |
- -
