Makita 2414NB OPERATION

OPERATION Hold the handle firmly. Switch on the tool and wait until the

wheel attains full speed before lowering gently into the cut.

When the wheel contacts the workpiece, gradually bear

down on the handle to perform the cut. When the cut is com-

pleted, switch off the tool and WAIT UNTIL THE WHEEL

HAS COME TO A COMPLETE STOP before returning the

handle to the fully elevated position.

CAUTION:

•Proper handle pressure during cutting and maximum

cutting efficiency can be determined by the amount of

sparks that is produced while cutting. Your pressure on

the handle should be adjusted to produce the maximum

amount of sparks. Do not force the cut by applying

excessive pressure on the handle. Reduced cutting

efficiency, premature wheel wear, as well as, possible

damage to the tool, cut-off wheel or workpiece may

result.

Max. cutting capacity varies depending upon the cutting

angle and workpiece shape. Applicable wheel diameter: 355

mm (14”)

Fold down the tool head to the position where you can attach

the chain to the hook on the handle.

Workpiece

shape

Cutting

angle

90˚ 115mm (4-1/2”) 119mm (4-11/16”)

115mm × 130 mm (4-1/2” × 5-1/8”)

102 mm × 194 mm (4” × 7-5/8”)

70 mm × 233 mm (2-3/4” × 9-1/8”)

137 mm (5-3/8”)

45˚

115mm (4-1/2”) 106 mm (4-3/16”)

115 mm × 103 mm (4-1/2” × 4-1/16”)

100 mm (3-15/16”)

003768