5
11. Before using the tool on an actual work-
piece, let it run for a while. Watch for
vibration or wobbling that could indicate
poor installation or a poorly balanced
wheel.
12. Watch out for flying sparks when operat-
ing. They can cause injury or ignite com-
bustible materials.
13. Remove material debris from the area that
might be ignited by sparks. Be sure that
others are not in the path of the sparks.
Keep a proper , charged extinguisher
closely available.
14. Use the cutting edge of the wheel only.
Never use side surface.
15. Do not attempt to keep the trigger in the
ON position.
16. If the wheel stops during operation,
makes an odd noise or begins to vibrate,
switch off the tool immediately.
17. Turn off the tool and wait for the wheel to
stop before moving workpiece or chang-
ing settings.
18. Do not touch the workpiece immediately
after operation; it is extremely hot and
could burn your skin.
19. Store wheels in a dry location only.
SAVE THESE INSTRUCTIONS