6
INSTALLATION

Securing cut-off

This tool should be bolted with two bolts to a level and stable
surface using the bolt holes provided in the tool’s base. This
will help prevent tipping and possible personal injury.
FUNCTIONAL
DESCRIPTION CAUTION:
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.

Switch action

CAUTION:
Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the “OFF”
position when released.
When not using the tool, remove the lock-off button and
store it in a secure place. This prevents unauthorized
operation.
To prevent the switch trigger from being accidentally pulled, a
lock-off button is provided.
To start the tool, depress the lock-off button and pull the
switch trigger. Release the switch trigger to stop.

Spark guard

The spark guard is factory-installed with its lower edge con-
tacting the base. Operating the tool in this position will cause
many sparks to fly around. Loosen the screw and adjust the
spark guard to a position at which minimum sparks will fly
around.
1. Base
2. Bolt holes
1
2
003800
1. Lock-off button
2. Switch trigger
1
2
003754
1. Screw
2. Spark guard
1
2
003756