MAINTENANCE
CAUTION :
Always be sure that the tool is switched off and unplugged before attempting t o perform inspection or maintenance.
Replacingcarbon brushes | I |
Remove and check the carbon brushes |
|
regularly. Replace when they wear down to |
|
the limit mark. Keep the carbon brushes |
|
clean and free to slip in the holders. Both |
|
carbon brushes should be replaced a t the |
|
same time. Use only Makita carbon brushes. |
|
Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
13
