Templet guide
The templet guide provides a sleeve through which the bit passes, allowing use of the trimmer with templet patterns.
Remove the chip deflector. Loosen the screws and remove the base protector. Place the templet guide on the base and re-
place the base protector. Then secure theBase Drotector base protector by tightening the screws.
Secure the templet to the workpiece. Place | 1 Straight bit | 4 I Templet guide 10 |
the tool on t h e templet and move the tool | ||
with the templet guide sliding along the |
|
|
side of the templet. |
|
|
l L Distance (X)
Workpiece 10 mm
(25/64")
NOTE :
The workpiece will be cut a slightly different size from the templet. Allow for the dis- tance (X) between the router bit and the outside of the templet guide. The distance ( X ) can be calculated by using the following equation :
Distance (X) =
outside diameter of the templet guide - router bit diameter
2
10
