Makita 4071D dimensions After use

Turn the pre-filter and pull it off toward you, emptying out the fine dust inside. Then take out the filter and tap out any adhering dust.

After emptying out the cleaner, re-assemblein the order shown in the figure.

1 . Fit filter snugly on all the way.

2.Slip on pre-filter.

3.Screw on the capsule.

I Capsule Pre-f ilter Filter

CAUTIONS:

I

0 Failure to re-assemble the filter and/or pre-filter so that they are back on all the way, or using a broken or ripped filter, can cause dust to get into the motor and result in a fa iIure.

Screw the capsule tightly into place. Tighten accessories (crevice tool, etc.) in the same direction as the capsule screws on.

After use

When recharging or storing the cleaner, hang the cleaner from a nail using the con- venient hanger in back.

9