Makita 433ODWA instruction manual Circular guide optional accessory, Vacuum head optionalaccessory

Circular guide (optional accessory)

Use of the circular guide insures clean, smooth cutting of circles under 200 mm (7-7/8") in radius. Insert the pin through the center hole and secure it with the threaded knob. Move the base of the tool fully for- ward. Then install the circular guide on the base in the same manner, as the guide rule (rip fence).

Vacuum head (optionalaccessory)

The vacuum head is recommended to per- form clean cutting operations. Install the plastic cover on the tool by fitting it into the notches in the tool.

To attach the vacuum head on the tool, insert the hook of the vacuum head into the hole in the base. The vacuum head can be installed on either left or right side of the base. Then connect a Makita vacuum cleaner to the vacuum head.

@Fit into notches

Base

L.

\Plastic cover

Hex wrench-

Plastic cover

I-Hose of vacuum head

14