Installing or removingthe saw blade
CAUTION:
Always be sure that the tool is switched off and battery removed before installing or removing the blade.
To install the blade, loosen the screw on the blade holder.
With the blade teeth facing forward, insert the blade into the blade holder as far as it will go. Make sure that the back edge of the blade fits properly in the groove of the roller. Then firmly tighten the screw to secure the blade.
CAUTION:
Always secure the blade firmly. Insufficientsecuring of the blade may cause blade break- age or serious injury.
Always clean out the blade holder before installing the blade. Chips or foreign matter on the blade holder may cause insufficient securing of the blade.
Use a lubricant or cutting oil between the blade and roller when cutting iron or composi- tion board, etc. Failure to do so will shorten the service life of your blade and roller or lead to potentially dangerous blade breakage.
8
