9
Hex wrench storage
Whennot in use, the hex wrench can be conveniently stored.
OPERATION CAUTION:
• Always hold the tool base flush with the workpiece.
Failureto do so may cause blade breakage, resulting in
aser ious injury.
Turn the tool on and wait until the blade attains full speed.
Then rest the tool base flat on the workpiece and gently
move the tool forward along the previously marked cutting
line.When cutting cur ves,advance the tool very slowly.
Bevel cutting
CAUTION:
• Always be sure that the tool is switched off and
unplugged beforetilting the tool base.
With the tool base tilted, you can make bevel cuts at any
anglebetween 0˚ and45˚ (left or right).
Loosenthe bolt on the back of the base with the hex wrench.
Move the base so that the bolt is positioned in the center of
the bevelslot in the base.
1. Base
2. Hexwrench
12
001937
1. Cutting line
2. Base
1
2
001938
001939
1. Base
2. Bolt
3. Hexwrench
1
2
3
001940