ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1.Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF).
2.Do not attempt to use a
3.Do not allow anything t o cover or clog the charger vents.
4.Always cover the battery terminals with the battery cover when the battery cartridge is not used.
5.Do not short the battery cartridge:
(I) Do not touch the terminals with any conductive material.
(2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
(3)Do not expose battery cartridge to water or rain.
Abattery short can cause a large current flow, overheating, possible burns and even a breakdown.
6.Do not store the tool and Battery Cartridge in locations where the tempera- ture may reach or exceed 5OoC (122OF).
7.Do not incinerate the Battery Cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.
ADDITIONAL SAFETY RULES
1.Avoid cutting nails. Inspect for and remove all nails from the workpiece be- fore operation.
2.Do not cut oversize workpiece.
3.Check for the proper clearance beyond the workpiece before cutting so that the blade will not strike the floor, workbench, etc.
4.Hold the tool firmly.
5.Make sure the blade is not contacting the workpiece before the switch is turned on.
6.Keep hands away from moving parts.
7.When cutting through walls, floors or wherever "live" electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL! Hold the tool only by the insulated grasping surfaces to prevent electric shock if you cut through a "live" wire.
8.Do not leave the tool running. Operate the tool only when
9.Always switch off and wait for the blade t o come to a complete stop before removing the blade from the workpiece.
10.Do not touch the blade or the workpiece immediately after operation; they may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5
