After use, return the hex wrench to the storage position.
\ Hex wrench | I |
Switch action
To prevent the trigger from being acciden- tally pulled, a
To start the tool, slide the
\
Trigger switch
CAUTION :
Before inserting the battery cartridge into the tool, always check to see that the trigger switch actuates properly and returns to the "OFF" position when released.
Operation
Turn the tool on and wait until the blade attains full speed. Then press the shoe against the workpiece and apply pressure to cut the workpiece.
CAUTION :
0 Be sure to wear gloves during operation.
0 Excessive pressure that causes bending or twisting of the blade may snap it.
8