FUNCTIONAL DESCRIPTION

CAUTION:

Always be sure that the tool is switched off before adjusting or checking function on the tool.

1

1. Charging plug

002059 Charging

Connect the charging plug to the charging connector, then plug in the charger to the power receptacle. Charging takes 3 hours.

CAUTION:

The battery in your new tool is not fully charged. You will need to charge it before use.

Do not operate the tool during charging.

Overcharging more than 2 days considerably shortens the battery service life.

Always unplug the charger after completing the charge.

002268

1

1. Switch trigger

002074

1

1. Reversing switch lever

Switch action

To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop.

Reversing switch action

This tool has a reversing switch to change the direction of rotation. Move the reversing switch lever to the “FWD” posi- tion for clockwise rotation or the “REV” position for counter- clockwise rotation.

When the reversing switch lever is in the neutral position, the switch trigger cannot be pulled.

CAUTION:

Always check the direction of rotation before operation.

Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool.

When not operating the tool, always set the reversing switch lever to the neutral position.

7

Page 7
Image 7
Makita 6176D instruction manual Functional Description, Charging, Switch action, Reversing switch action