Installing or removing driver bit or drill bit
CAUTION :
Always be sure that the tool is switched off and the battery cartridge i s removed before installing or removing the bit.
To install the bit, push the sleeve up to- | I |
| |
ward the "FREE" side and turn the sleeve | FREE side | ||
counterclockwise while holding the ring | |||
|
| ||
with your other hand as illustrated a t right. |
|
|
Place the bit in the chuck as far as it will go. Hold the ring firmly and turn the sleeve clockwise to tighten the chuck. Then push the sleeve down toward the "LOCK' side. See illustration.
To remot the bit, push the sleeve up toward the "FREE' side and turn the sleeve counterclockwise while holding the ring with your other hand.
CAUTION :
0 Do not attempi to turn the sleeve forcibly when the sleeve is in the "LOCK" position. The sleeve may be damaged.
.Always push the sleeve down toward the "LOCK' side before operation. If you operate the tool with the sleeve in the "FREE" position, the chuck may loosen and the bit may come out unexpectedly.
7
