Selecting the action mode
This tool employs an action mode changing ring Select one of the three modes suit- able for your work needs by using this ring For rotation only, turn the ring so that the arrow on the tool body points toward the anamark on the ring For rotation with hammering, turn the ring so that the arrow points toward the +on the ring For rota- tion with clutch, turn the ring so that the arrow points toward the m3 mark on the ring
' '
Action mode changing ring
Arrow
I
CAUTION:
Always set the ring correctly to your desired mode mark. If ring positioned
Adjusting the fastening torque
The fastening torque can be adjusted in 16 steps by turning the adjusting ring so that its graduations are aligned with the arrow on the tool body. The fastening torque is minimum when the number 1 is aligned with the arrow, and maximum when the number 16 is aligned with the arrow.
Before actual operation, drive a trial screw into your material or a piece of duplicate material to determine which torque level is required for a particular application.
you operate the tool with the may be damaged.
A
11
