Operationr
1.Waxing
Switch on the tool. Move the tool slow- ly over the work surface with front t o back, side to side movement while apply- ing light pressure to the tool so that wax will be applied to the work surface thin and evenly.
Apply light pressure
a
Move slowly
(Note)
*Do not bear down the tool excessively during operation. Smooth and even waxing cannot be performed because the bottom of the sponge will not move correctly as designed.
*The tool may become hot during operation. This i s a normal condition and does not indicate a problem.
When resting the tool, use the handy I plastic case provided so that mud and/or
sand will not stick to the sponge.
/ | Plastic case |
|
Buff the dried wax by rubbing the car body surface with a clean, soft and dry cloth.
2.Removing stubborn dirt and oil film
For removing stubborn dirt from the car body surface and oil film from the windshield, apply the appropriate polish/cleaner for the application to the sponge and operate the tool in the same manner as waxing.
(Note)
When changing from the use of wax, polish or cleaner, always wash the sponge in detergent solution before starting the next job.
6
