![](/images/backgrounds/274877/bga.png)
TOOL INSTALLATION INSTRUCTIONS
AND USE Lubrication
To insure
maximum performance, install
an
airset
(oiler, regulator,
air filter) as close as possible to the
tool. Adjust the oiler
so
that
one drop of oil
will
be
provided for every
50 nails.
When
an
air
set is
not used, oil the tool
with pneumatic
tool oil by placing
2 (two) or
3 (three) drops into the
air fitting.
This should be done before and after use.
For proper lubrication, the tool must be fired
a couple
of times after pneumatic tool oil is introduced.
Loading nailer
CAUTION :
Always lock the trigger by turning the lock knob (lock
pin)
90" and disconnect the hose before loading the
nailer.
To open the slide door,
pull
the door knob toward you
while pushing
up
the leaf spring.
..
._.
.
..
I
Lock knob (Lock
pin)
E Slide
door
10