P 5/10
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Gear assembly and Motor section
DISASSEMBLING
(3) Disassemble Gear assembly and Motor section. (Fig. 9)
Fig. 9
3.Unscrew nine 3x16 Tapping screws, then remove Housing (R).
Housing (R)
4. Remove the assembly of |
| 5. Remove Speed change lever, |
Motor section and Gear section. |
| then separate Gear assembly |
|
| from Motor section. |
| ||
|
|
|
Speed change lever
Gear assembly
Motor section
6.Remove Armature along with Yoke unit from Brush holder complete.
Yoke unit
Armature
7.Pull Armature from Yoke unit.
Yoke unit
Armature
