P 6/10
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Gear assembly and Motor section (cont.)
ASSEMBLING
(3) Put Leaf spring in place on the inside of Housing (L). (Fig. 10)
Fig. 10
Be sure to put Leaf spring | Housing (L) |
|
| Leaf spring |
in place as drawn on the right. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(4) Insert Armature into Yoke unit carefully and connect Motor section to Gear assembly. (Fig. 11)
Fig. 11
[Correct] [Wrong]
notch
Notch must be located on Armature
[Correct][Wrong]
Note: Be careful when inserting Armature as fingers can be pinched and injured.
Be sure to hold Commutator portion as your fingers can be pinched by Armature fun due to strong magnetic force toward Yoke unit.
3. Mount Speed change lever to Gear assembly. (Refer to Fig. 14)
2. Connect Motor section to Gear assembly by engaging Armature gear with Planetary gears in Gear assembly.
1. Insert Commutator end into Brush holder complete.
