Xerox 8560MFP/8860MFP manual Unix Linux, Quick Install Steps, From the Printer

Models: 8560MFP/8860MFP

1 83
Download 83 pages 37.36 Kb
Page 49
Image 49

UNIX (Linux)

UNIX (Linux)

Your printer supports connection to a variety of UNIX platforms through the parallel and network interface. The workstations currently supported by CentreWare for UNIX/Linux to a network-connected printer are:

Sun Solaris

IBM AIX

Hewlett-Packard HP-UX

DEC UNIX

Linux (i386)

Linux (PPC)

SGI IRIX

The following procedures enable you to connect your printer using any of the supported versions of UNIX or Linux listed above.

Quick Install Steps

Perform the following procedures to set up the printer and install the appropriate drivers.

From the Printer

To set up the printer:

1.Verify that both TCP/IP protocol and the proper connector are enabled.

2.On the control panel, select one of these IP address options:

Allow the printer to set up a DHCP address.

Enter the IP address manually.

3.Print the Configuration page and keep it for reference.

Phaser® 8560MFP/8860MFP Multifunction Printer

3-15

Page 49
Image 49
Xerox 8560MFP/8860MFP manual Unix Linux, Quick Install Steps, From the Printer