Macintosh

Creating an AppleTalk Printer with Mac OS X, Version 10.3 and Higher

To create an AppleTalk printer:

1.Verify that AppleTalk is enabled in System Preferences.

2.Open the Print Center utility. In Mac OS X, version 10.3 or higher, open the Printer Setup Utility. The utility is located in a directory called Utilities in the Applications directory.

3.Select Add Printer, and then select AppleTalk from the pull-down list.

4.Select the appropriate zone.

5.Select your printer from the list provided.

6.Select the appropriate PPD from the list in the Printer Model drop-down list. If your printer PPD is not listed, install it from the Software and Documentation CD-ROM.

7.Click Add to complete the configuration.

See also:

Online Support Assistant at:

www.xerox.com/office/8560MFPsupport (Phaser 8560MFP Printer)

www.xerox.com/office/8860MFPsupport (Phaser 8860MFP Printer)

Creating a Bonjour Printer with Mac OS X, Version 10.3 and Higher (Recommended)

To create a Bonjour printer:

1.Open the Print Center utility. In Mac OS X, version 10.3 or higher, open the Printer Setup utility. The utility is located in Utilities in the Applications directory.

2.Select one of the following options:

Version 10.3: From the top pull-down menu, select Bonjour.

Version 10.4 and higher: Select your printer from the list and ensure Bonjour and not Apple Talk is in the Connection column. Your PPD is automatically selected.

A list appears displaying name of your printer, followed by a series of numbers. For example, Your Printer’s Name xx:xx:xx. Each numbered segment represents the last section of your printer’s hardware address. Your PPD is automatically selected.

3.Click Add to complete the installation.

Phaser® 8560MFP/8860MFP Multifunction Printer

3-13

Page 47
Image 47
Xerox 8560MFP/8860MFP manual Verify that AppleTalk is enabled in System Preferences