3
Electrical Safety
4. Grounded tools must be plugged into an
outlet properly installed and grounded in
accordance with all codes and ordi-
nances. Never remove the grounding
prong or modify the plug in any way.Do
not use any adaptor plugs. Check with a
qualified electricianif you are in doubt as
to whether the outlet is properly
grounded.If the tools should electrically mal-
functionor break down, grounding provides a
low resistance path to carry electricity away
fromthe user.
5. Avoid body contact with grounded sur-
facessuch as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electricshock if your body is grounded.
6. Do not expose power tools to rain or wet
conditions. Water enteringa power tool will
increasethe risk of electric shock.
7. Donot abuse the cord. Never use the cord
to carry the tools or pullthe plug from an
outlet. Keep cord away from heat, oil,
sharp edges or moving parts. Replace
damaged cords immediately. Damaged
cordsincrease the risk of electric shock.
8. Whenoperating a power tool outside, use
an outdoor extension cordmarked “W-A”
or “W”. These cords are rated for outdoor
useand reduce the risk of electric shock.
PersonalSafety
9. Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use tool while tired or
under the influence of drugs, alcohol, or
medication. A moment of inattention while
operating power tools may result in serious
personalinjury.
10. Dress properly.Do not wear loose cloth-
ing or jewelry. Contain long hair. Keep
your hair,clothing, and gloves away from
movingparts. Loose clothes, jewelry, or long
haircan be caught in moving parts.
11. Avoidaccidental starting. Be sure switch
isoff before plugging in. Carrying tools with
your fingeron the switch or plugging in tools
thathave the switch on invites accidents.
12. Remove adjusting keys or wrenches
before turning the tool on. A wrench or a
key that is left attached toa rotating par t of
thetool may result in personal injury.
13. Do not overreach. Keep proper footing
andbalance at all times. Proper footing and
balance enables better control of the tool in
unexpectedsituations.
14. Use safety equipment. Alwayswear eye
protection. Dust mask, non-skid safety
shoes, hard hat, or hearing protection must
be used for appropriate conditions.Ordinar y
eyeor sun glasses are NOT eye protection.
ToolUse and Care
15. Use clamps or other practical way to
secure and support the workpiece to a
stableplatform. Holding the work by hand or
against your body is unstable andmay lead
toloss of control.
16. Do not force tool. Use the correct tool for
yourapplication. The correct tool will do the
job better and saferat the rate for which it is
designed.
17. Do not use tool if switch does not turn it
on or off. Any tool that cannotbe controlled
with the switch is dangerous and must be
repaired.
18. Disconnect the plug from the power
source before making any adjustments,
changingaccessories, or storing the tool.
Such preventivesafety measures reduce the
riskof starting the tool accidentally.
19. Store idle tools out of reach of children
and other untrained persons. Tool s are
dangerousin the hands of untrained users.
20. Maintain tools with care. Keep cutting
tools sharp and clean. Properly maintained
tools with sharp cutting edges are less likely
tobind and are easier to control.