Safety precautions for chain saw operators

While operating the chain saw please observe the following rules:

a)Contact of the guide bar nose with any object should be avoided.

b)Tip contact may cause the guide bar to move suddenly upward and backward, which may cause serious or fatal injury.

c)Always operate the chain saw with both hands.

WARNING!

Read and follow all safety precautions in the Owner’s and Safety Manual. Failure to follow instructions could result in serious injury. It is recommended to lend the chain saw only to people who are experienced in working with chain saws. Always hand over the Owner’s and Safety Manual.

WARNING!

This chain saw is capable of severe kickback that could result in serious injury to the operator. Do not operate this chain saw unless you have extraordinary cutting needs and experience in and special training for dealing with kickback. Chain saws with significantly reduced kickback potential are available.

WARNING!

Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. This contact may abruptly stop the saw chain and in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the user, or push the guide bar back towards the operator. Kickback may cause you to lose control of the saw.

As a chain saw user, you can take several steps to reduce the risk of a kickback and potential injury.

A.With a basic understanding of kickback, you can reduce or eliminate the element of surprise. It is a sudden surprise that contributes to accidents.

B.Keep a good firm grip on the saw with both hands, your right hand on the rear grip and your left hand on the tubular handle, when the engine is running. Use a firm grip with thumbs and fingers encircling the chain saw handles. A firm grip can neutralize kickback and help you maintain control of the saw. Don’t let go!

C.Make sure that the area in which you are cutting is free from obstructions. Do not let the nose of the guide bar contact the log, branch, or any other obstructions which could be hit while you are operating the saw.

D.Do not overreach or cut above shoulder height.

E.Follow manufacturer’s sharpening and main- tenance instructions for the saw chain.

F.Only use replacement bars and chains speci- fied by the manufacturer or the equivalent.

Additional safety precautions

The following additional safety precautions should be observed by all users of chain saws:

1.Do not operate a chain saw when you are fatigued.

2.Use safety footwear; snug-fitting clothing; protective gloves; and eye, hearing, and head protection devices.

3.Use caution when handling fuel. Move the chain saw at least 10 feet (3 m) from the fueling point before starting the engine.

4.Do not allow other persons to be near the chain saw when starting or cutting with the chain saw. Keep bystanders and animals out of the work area.

5.Do not start cutting until you have a clear work area, secure footing, and a planned retreat path from the falling tree.

6.Keep all parts of your body away from the saw chain when the engine is running.

7.Before you start the engine, make sure that the saw chain is not contacting anything.

8.Carry the chain saw with the engine stopped, the guide bar and saw chain to the rear, and the muffler away from your body.

9.Do not operate a chain saw that is damaged, is improperly adjusted, or is not completely and securely assembled. Be sure that the saw chain stops moving when the throttle control trigger is released.

10.Shut off the engine before setting it down.

11.Use extreme caution when cutting small size brush and saplings because slender material may catch the saw chain and be whipped toward you or pull you off balance.

12.When cutting a limb that is under tension be alert for springback so that you will not be struck when the tension on the wood fibers is released.

13.Keep the handles dry, clean, and free of oil or fuel mixture.

14.Operate the chain saw only in well-ventilated areas.

15.Do not operate a chain saw in a tree unless you have been specifically trained to do so.

16.All chain saw service, other than the items listed in the Owner’s Manual maintenance instructions, should be performed by MAKITA. (For example, if improper tools are used to remove the flywheel or if an improper tool is used to hold the flywheel in order to remove the clutch structural damage to the flywheel could occur and could subsequently cause the flywheel to burst.)

17.When transporting your chain saw, use the chain protection cover.

18.Low kickback bars and low kickback chains are designed to reduce the risk of kickback injury. Ask your MAKITA dealer about these devices.

4

Page 3 Page 5
Page 4
Image 4
Makita DCS 6800I, DCS 6000I manual Safety precautions for chain saw operators, Additional safety precautions
Page 3 Page 5

DCS 6800I, DCS 6000I specifications

The Makita DCS 6000I and DCS 6800I are two formidable chainsaw models from a brand renowned for its commitment to durability, performance, and innovation. Both saws are designed for professional users who require power, efficiency, and precision in their cutting tasks.

Starting with the DCS 6000I, it offers an impressive engine displacement of 59 cc, producing high torque and enabling effective cutting through thick wood with ease. Its lightweight design, weighing approximately 5.8 kg, ensures better maneuverability during extended use. The DCS 6000I incorporates a 20-inch guide bar, making it suitable for a variety of applications, from felling trees to milling logs.

A key feature of the DCS 6000I is its advanced anti-vibration technology, which minimizes user fatigue and enhances comfort. The model is equipped with an automatic chain lubrication system that maintains optimal performance and prolongs the lifespan of the chain. The air cleaner is easily accessible and designed to filter out debris, ensuring clean air intake and efficient engine performance.

Moving on to the DCS 6800I, it takes power to the next level, featuring a robust 66 cc engine. This model is an ideal choice for professional users involved in heavy-duty cutting tasks. Weighing approximately 6.2 kg, it strikes a balance between power and manageability. Its 24-inch guide bar makes it a perfect fit for felling larger trees and undertaking more demanding forestry work.

The DCS 6800I is characterized by its high-performance oil pump that allows for adjustable flow rates, ensuring efficient lubrication based on the cutting conditions. Additionally, this model features an innovative decompression valve, allowing for easy starting and improved user experience. The DCS 6800I also has a semi-automatic choke that enhances startup efficiency.

Both models exhibit excellent build quality, featuring magnesium components that contribute to their lightweight yet robust structure. They also come with a tool-less air filter cover, facilitating ease of maintenance. Safety is a priority with both saws, equipped with chain brakes and throttle locks to prevent accidental starts.

In summary, the Makita DCS 6000I and DCS 6800I are exceptional chainsaws that cater to the needs of professional users. With advanced technologies, durable construction, and innovative features, these models are well-suited for various applications in forestry and landscaping, ensuring reliability, efficiency, and safety in all cutting tasks.
Top Page Image Contents