Makita EBH340U Safety Instructions, General Instructions, Intended use of the machine

SAFETY INSTRUCTIONS

General Instructions

–To ensure correct operation, user has to read this instruction manual to make himself familiar with the handling of the Brush Cutter. Users insufficiently informed will risk danger to themselves as well as others due to improper handling.

–It is recommended only to lend the Brush Cutter to people who have proven to be experienced with Brush Cutter. Always hand over the instruction manual.

–First users should ask the dealer for basic instructions to familiarize oneself with the handling of an engine powered cutter.

–Children and young persons aged under 18 years must not be allowed to operate the Brush Cutter. Persons over the age of 16 years may however use the device for the purpose of being trained only whilst under supervision of a qualified trainer.

–Use Brush Cutter with the utmost care and attention.

–Operate the Brush Cutter only if you are in good physical condition. Perform all work calmly and carefully. The user has to accept liability for others.

–Never use the Brush Cutter after consumption of alcohol or drugs, or if feeling tired or ill.

Intended use of the machine

–The Brush Cutter is only intended for cutter grass, weeds, Bushes, undergrowth it should not be used for any other purpose such as Edging or hedge cutting as this may cause injury.

Personal protective equipment

–The clothing worn should be functional and appropriate, i.e. it should be tight-fitting but not cause hindrance. Do not wear either jewelry or clothing which could become entangled with bushes or shrubs.

–In order to avoid either head-, eye-, hand-or foot injuries as well as to protect your hearing the following protective equipment and protective clothing must be used during operation of the Brush Cutter.

–Always wear a helmet where there is a risk of falling objects. The protective helmet (1) is to be checked at regular intervals for damage and is to be replaced at the latest after 5 years. Use only approved protective helmets.

–The visor (2) of the helmet (or alternatively goggles) protects the face from flying debris and stones. During operation of the Brush Cutter always wear goggles, or a visor to prevent eye injuries.

–Wear adequate noise protection equipment to avoid hearing impairment (ear muffs (3), ear plugs etc.).

–The work overalls (4) protect against flying stones and debris.

We strongly recommend that the user wears work overalls.

–Special gloves (5) made of thick leather are part of the prescribed equipment and must always be worn during operation of the Brush Cutter.

(1)

(2)

(3)

(4)

(5)(6)

4