MOUNTING OF PROTECTOR
–The cutter blade must be well polished, free of cracks or breakage. If the cutter blade hits against a stone during operation, stop the engine and check the blade immediately.
–Polish or replace the cutter blade every three hours of operation.
CAUTION: The appropriate protector must always be installed, for your own safety and in order to comply with
Operation of the equipment without the guard being in place is not permitted.
–The outside diameter of the cutter blade must be 305mm (12”). Never use any blades surpassing 305mm (12”) in outside diameter.
–Fix the protector (1) to the clamp (3) with two bolts M6 x 20 (2).
(2)
(3)
(1)
14
