FP2/FP2SH
Specifications
Input units
|
|
|
|
|
|
| DC input unit |
|
| I/O mixed unit (input side) | |
Item |
|
|
|
|
|
| 1) | 2) | 3) | ||
|
|
|
|
|
| DC input type/Transistor output (NPN) type | DC input type/Transistor output (PNP) type | ||||
|
|
|
|
|
|
| |||||
Rated input voltage |
|
| 12 - 24VDC | 24VDC | 24VDC |
| 24VDC | 24VDC | |||
Rated input current |
|
| Approx. 8mA (at 24VDC) | Approx. 4.3mA (at 24VDC) | Approx. 4.3mA (at 24VDC) | Approx. 4.3mA (at 24VDC) | Approx. 4.3mA (at 24VDC) | ||||
Input impedance |
|
|
|
| Approx. 3kΩ | Approx. 5.6kΩ | Approx. 5.6kΩ |
| Approx. 5.6kΩ | Approx. 5.6kΩ | |
Min. ON voltage/Min. ON current | 9.6V/4mA | 19.2V/4mA | 19.2V/4mA |
| 19.2V/4mA | 19.2V/4mA | |||||
Max. OFF voltage/Max. OFF current | 2.5V/1mA | 5.0V/1.5mA | 5.0V/1.5mA |
| 5.0V/1.5mA | 5.0V/1.5mA | |||||
Response | OFF | → | ON | 0.2ms or less | 0.2ms or less | 0.2ms or less |
| 0.2ms or less | 0.2ms or less | ||
|
|
| |||||||||
time | ON | → | OFF | 0.2ms or less | 0.3ms or less | 0.3ms or less |
| 0.3ms or less | 0.3ms or less | ||
|
|
|
| ||||||||
Input points per common | 8 points/common | 32 points/common | 32 points/common |
| 32 points/common | 32 points/common | |||||
(Either the positive or negative of the input power |
|
|
|
|
| ||||||
|
|
|
|
|
| supply can be connected to the common terminal.) |
|
|
|
|
|
Connection method |
|
| Terminal block (M3 screw) | One | Two |
| Two | Two | |||
Notes: The number of ON points that can be actuated simultaneously is limited by the input voltage and the ambient temperature.
1)The specifications also apply to the input side of the CPU unit with 64 input points
2)The specifications also apply to the
3)The specifications also apply to the
Output units
|
|
| Relay output unit |
|
| Transistor output unit |
|
| I/O mixed unit (output side) note 3) and 4) | ||||
|
|
| note 1) |
| NPN open | PNP open | NPN | PNP | NPN | PNP | DC input type/ | DC input type/ | |
Item |
|
| collector | collector | Transistor output | Transistor output | |||||||
| open collector | open collector | open collector | open collector | |||||||||
|
|
| note 2) | note 2) | (NPN) type | (PNP) type | |||||||
|
|
|
|
|
|
|
|
| |||||
|
|
| |||||||||||
|
|
| 5A 250VAC (10A/common) | 2A 250VAC (5A/common) |
|
|
|
|
|
|
|
| |
Rated control capacity | 5A 30VDC (10A/common) | 2A 30VDC (5A/common) |
|
|
|
|
|
|
|
| |||
Min. load: 100mA | Min. load: 100∝A | − | − | − | − | − | − | − | − | ||||
|
|
| |||||||||||
|
|
| 10V (resistor load) | 10V (resistor load) |
|
|
|
|
|
|
|
| |
Rated load voltage | − | − | |||||||||||
− | − | ||||||||||||
Max. load current | 0.5A (at 12 to 24VDC) | 0.5A (at 12 to 24VDC) | 0.1A (at 12 to 24VDC) | 0.1A (at 12 to 24VDC) | 0.1A (at 12 to 24VDC) | 0.1A (at 12 to 24VDC) | 0.1A (at 12 to 24VDC) | 0.1A (at 12 to 24VDC) | |||||
− | − | ||||||||||||
0.1A (at 5VDC) | 0.1A (at 5VDC) | 50mA (at 5VDC) | 50mA (at 5VDC) | 50mA (at 5VDC) | 50mA (at 5VDC) | 50mA (at 5VDC) | 50mA (at 5VDC) | ||||||
|
|
| − | − | |||||||||
Max. surge current | 3A 10ms or less | 3A 10ms or less | 0.3A | 0.3A | 0.3A | 0.3A | 0.3A | 0.3A | |||||
|
| ||||||||||||
OFF state leakage current | − | − | 1∝A or less | 1∝A or less | 1∝A or less | 1∝A or less | 1∝A or less | 1∝A or less | 1∝A or less | 1∝A or less | |||
|
|
|
|
|
|
| 1V or less | 1.5V or less | 1V or less | 1.5V or less | 1V or less | 1.5V or less | |
ON state maximum | − | − | 0.5V or less | 0.5V or less | (at 6 to 26.4VDC) | (at 6 to 26.4VDC) | (at 6 to 26.4VDC) | (at 6 to 26.4VDC) | (at 6 to 26.4VDC) | (at 6 to 26.4VDC) | |||
voltage drop |
|
|
|
|
| 0.5V or less | 0.5V or less | 0.5V or less | 0.5V or less | 0.5V or less | 0.5V or less | ||
|
|
|
|
|
|
| (at 6VDC or less) | (at 6VDC or less) | (at 6VDC or less) | (at 6VDC or less) | (at 6VDC or less) | (at 6VDC or less) | |
Repose time |
| OFF→ON | 10ms or less | 10ms or less | 0.1ms or less | 0.1ms or less | 0.1ms or less | 0.1ms or less | 0.1ms or less | 0.1ms or less | 0.1ms or less | 0.1ms or less | |
| ON→OFF | 8ms or less | 8ms or less | 0.3ms or less | 0.3ms or less | 0.3ms or less | 0.3ms or less | 0.3ms or less | 0.3ms or less | 0.3ms or less | 0.3ms or less | ||
|
| ||||||||||||
Power supply |
| Voltage | 24VDC±10% | 24VDC±10% | 4.75 to 26.4VDC | 4.75 to 26.4VDC | 4.75 to 26.4VDC | 4.75 to 26.4VDC | 4.75 to 26.4VDC | 4.75 to 26.4VDC | 4.75 to 26.4VDC | 4.75 to 26.4VDC | |
| (21.6V to 26.4VDC) | (21.6V to 26.4VDC) | |||||||||||
for driving |
|
|
|
| 120mA or less | 70mA or less | 140mA or less | 150mA or less | 250mA or less | 270mA or less | 120mA or less | 130mA or less | |
internal circuit |
| Current | 70mA or less | 160mA or less | |||||||||
|
|
|
|
| (at 24VDC) | (at 24VDC) | (at 24VDC) | (at 24VDC) | (at 24VDC) | (at 24VDC) | (at 24 VDC) | (at 24 VDC) | |
Input points per common | 2 points/common | 8 points/common | 8 points/common | 8 points/common | 32 points/common | 32 points/common | 32 points/common | 32 points/common | 32 points/common | 32 points/common | |||
Connection method | Terminal block | Terminal block | Terminal block | Terminal block | One | One | Two | Two | Two | Two | |||
(M3 screw) | (M3 screw) | (M3 screw) | (M3 screw) | connector | connector | connectors | connectors | connectors | connectors | ||||
|
|
| |||||||||||
Notes: The number of ON points that can be actuated simultaneously is limited by the input voltage and the ambient temperature.
The maximum load current is limited by the external power supply voltage.
1)The current capacity of each common terminal is 5A max.
2)The maximum load current of the transistor output unit is limited by the external power supply voltage.
3)The specifications also apply to the
4)The specifications also apply to the
09/2007 | 19 |
