Makita FP2SH Series Positioning, Optimal Combination with Servo Drives,  Rtex positioning units

Positioning

Optimal Combination with Servo Drives

 "RTEX" positioning units

Compatible with Realtime Express MINAS A4N* network servo systems.

Facilitate multi-axis high precision positioning

High-accuracy multi-axis positioning control achieved by high-speed 100Mbps communication.

Compatible with commercially available LAN cables, significantly reducing wiring costs.

Two-axis unit available in addition to the four- and eight-axis units.

Data from a maximum of 600 points can be registered for each axis.

Three-axis helical interpolation supported in addition

to two-axis linear and two-axis circular interpolation functions.

Dedicated tool software "Configurator PM" supports operations from setup through startup and monitoring.

Equipped with a manual pulser input terminal, allowing for fine teaching.

*Realtime Express and MINAS A4N are a trademark and a product name of Matsushita Electric Industrial Co., Ltd.

High-speed 100Mbps communications

Monitoring LEDs

• Status indicator

• Link status

• Error indicator

• Pulser input status

Pulser input terminal

Network	2 axes: FP2-PN2AN
(transmission) port
	4 axes: FP2-PN4AN
Network
(reception) port	8 axes: FP2-PN8AN

Controls up to 256 axes, adequately supporting large-scale equipment control

Up to 32 eight-axis units can be connected and up to 256 axes controlled (when using FP2SH with H type backplane).

Selectable among two, four, and eight-axis types to flexibly support control system configurations of a few or multiple axes.

Use in combination with the ultra-high speed and large capacity FP2SH CPU unit (20k steps/1ms (measured by our company), program capacity of 120k steps) adequately supports the control of large-scale equipment.

System configuration:

Maximum number of connectable	One positioning unit can control two to
positioning units "RTEX"	eight axes (depending on the type).
FP2: 16 units FP2SH: 32 units	Servo amplifier: MINAS A4N manufactured by
	Matsushita Electric Industrial Co., Ltd.

	Commercially
TOOL port of CPU unit	available LAN
	cable
	(Ethernet category 5e
Dedicated tool software for	shielded type)
positioning units "RTEX"
Configurator PM
Programming tools
Control FPWIN GR
Control FPWIN Pro

I/O signals of home position proximity sensors, limit sen- sors, etc. are sent to A4N

Dedicated tool software for MINAS manufac- tured by Matsushita Electric Industrial Co., Ltd.

Panaterm

Contact for inquiries about MINAS AC servomotor series: Panasonic Electric Works Europe AG

Telephone: +49 (0) 8024-648-0, Fax: +49 (0) 8024-648-111, www.panasonic-electric-works.com

09/2007