VBrick Systems VB6000, VB4000, VB5000 Configuration System Snmp Traps, Front Panel LCD Display

WM Configuration

Current	Indicates the current operational mode of the VBrick. The following
Operational Mode	modes are supported. Note: Changing the Operational Mode
	automatically reboots the VBrick.
Configured	Indicates the configured operational mode of the VBrick. The
Operational Mode	following modes are supported:
	• Run Mode – Normal operation.
	• Diagnostics – User selected mode for running certain VBrick
	diagnostics.
Time Zone	Select from list: (GMT-12) Eniwetok – (GMT +12) Auckland.
Daylight Savings	Enabled or Disabled.
Time
IR Enable	Enable or Disable the IR remote control. This is the master enable and
	disable for the IR across all functions.
Fan Mode	This option allows a user to either force the fan always high or to
	automatically cycle on and off based on measured temperature. Default
	= Automatic.
SAP Timing	Fixed or Variable - If fixed, the SAP timing will operate as defined in
Method	the encoder, decoder and pump screens with fixed SAP transmission
	and timeouts. If variable is selected, the entire VBrick will use SAP
	timing as defined in RFC 2974. For most applications, Fixed Timing
	should be used.
RFC2974	Allows setting the SAP bandwidth allocation in bits per second. This
Bandwidth	setting is used only when the Timing Method is set to Variable.
Relay Control	This option allows forcing the relay connection to Open or Closed.

Front Panel LCD Display

These settings will be displayed for approximately 6 seconds. After 6 seconds the LCD will display the current release, IP address, hostname, plus transmit and receive addresses and other status information.

Box IP Address	Enable or Disable the Box IP Address display on the Front Panel
	Display.
Destination IP	Enable or Disable the Destination IP Address display on the Front
Address	Panel Display.
User String Enabled	Enable or Disable the text displayed on the front panel LCD of the
	VBrick appliance can be user defined.
Top Line User	The top line can support up to 16 characters. (characters in excess of
String	16 will scroll across the display for the bottom line).
Bottom Line User	The bottom line up to 40 characters.
String

Configuration: System > SNMP Traps

SNMP Traps are a subset of the SNMP management component of the VBrick. Use of any element of the SNMP management system requires use of an SNMP browser or SNMP

VBrick WM Appliance Admin Guide 77