VBrick Systems VB5000, VB6000, VB4000 manual Status Jpeg Status

Failed Count	Increments each time a push sender tries to connect but fails.
	Common reasons for failed attempts are incorrect publishing point
	name, user name, or password. Note: A successful push that is active
	and incrementing the Failed Count usually indicates that another
	source is trying to push to this server.
Last Failed Login IP	The address of the last push sender that failed a connection attempt.
Estimated Receive	The calculated rate of the incoming reflected stream.
Rate
ASF
Packets Created	Packets created for Multicast, Server, Push, or Archive. If any
	destination is not active, the counts are not incremented even though
	the reflected stream is active.
Buffer Full Count	Count of packets dropped because the destination was busy.
Multicast
Transmit State	Transmitting/Not Transmitting. Indicates whether or not a multicast
	is active.
IP Bytes Transferred	Number of bytes multicast.
IP Packets Sent	Number of packets multicast.

Status: JPEG Status

Displays JPEG image capture status if enabled. See Configuration: JPEG on page 66 for more about configuration.

100 © 2008 VBrick Systems, Inc.