VBrick Systems VB6000 Video Template Settings -- Slot1 Video Rate1, Video Rate2, Video Rate3

WM Configuration

Figure 8. Configuration: Encoder > Video – Part 2

Video Template Settings -- Slot1 (Video Rate1)

The video settings can be changed on this page or by modifying a template setting on the Configuration: Encoder > Template page of IWS. Any changes you make on this page override the template; they do not change it. If you are using only one video rate you can choose any resolution from the complete list of supported resolutions (with minor exceptions). However when you enable Video Rate2 or Video Rate3 the selections are restricted. Tables 9 and 10 below show the resolution combinations that are allowed. For example, 640x480 can be configured on one video encoder and 320x240 can be configured on another video encoder, but 320x240 and 240x180 are not allowed together. Once Video Rate2 and/or Video Rate3 are enabled they will be available for selection on the Multicast, Server, and Archiver pages. If they have been selected for inclusion on the those pages an error will appear on this page if you attempt to disable them. The resolutions available for NTSC and PAL are basically identical. The only difference is in 16:9 mode (Table 10) where NTSC has 384x216 and PAL has 512x288.

Table 9. Supported 4:3 Video Encoding Resolutions (in pixels)

Video Rate1	Video Rate2	Video Rate3
160x120	160x120	160x120
240x180	240x180	240x180

VBrick WM Appliance Admin Guide 29