VBrick Systems VB4000, VB6000, VB5000 Status Reflector Status General, Multicast, Push Receive

Status

Multicast

Transmit State	Transmitting/Not Transmitting.
IP Bytes Transferred	Total IP Bytes Transferred since last Reset.
IP Packets Sent	Total IP Packets Sent since last Reset.

Status: Reflector Status

Status: Reflector Status > General

The Reflector Status page displays status based on the selected source. If you select Push Receiver as the Reflector Source on the Configuration: Reflector page, you will see "push" information; if you select Pull Receiver, you see the corresponding "pull" information.

Push Receive

Push Receiver Status	Indicates the current state of the reflector receiver. Started/Receiving
Pull Receiver Status	means that the reflector is receiving a stream.
Receiver Source IP	The address of the push source currently sending to this reflector.
Bytes Received	Increments as data is successfully received.
Elapsed Time	The duration of the currently active push receiver connection.
Success Count	Increments each time a push sender initiates a new connection with
	this push receiver.

VBrick WM Appliance Admin Guide 99