VBrick Systems VB5000, VB6000 manual Status Network Status Codec, General, Interface, COM1/COM2

Power Supply Voltage

Displays the measured voltages present and provided to the VBrick (24V, 12V, 5V, 3.3V 2.5V). The tolerance range for 24V is minimum 18V to maximum 25V. The range for all other voltages is plus or minus 5%.

Status: Network Status

Status: Network Status > Codec

This page lets you view various network-level parameters.

General

COM1/COM2	The current operational state of COM1/COM2 serial passthrough
Passthrough	port. The possible values are:
Operational State	•	Disabled.
	•	Enabled Active.
	•	Enabled Internal Error.
	•	Enabled Rejected.
	• No Dedicated IP Addr.
Active RFC-SAP Count	Number of SAP sessions the appliance is currently listening to for
	the purpose of RFC 2974-compliant SAP timing.
Network Port Status	Status of the Ethernet network interface.
Network Port Speed	Speed of transmission for the Ethernet network interface.
Network Port Mode	The mode of transmission for the Ethernet network interface.

Interface

This section reports the existence of any undesired (and unrequested) video streams being received by the VBrick. Unrequested streams greater than 1.5 Mbps are automatically flagged and dropped. The reporting is made for each IP interface individually. On Ethernet models, only one interface exists.

94 © 2008 VBrick Systems, Inc.