VBrick Systems VB5000, VB6000, VB4000 manual Http SAP, Rtspu SAP, Rtsp URL

network packets. The HTTP, RTSPU, and External Server SAPs controlled here all share the Announce Common Information that is shown read-only on this page but can be changed on the Configuration: Encoder > Announce (SAP) page.

Figure 10. Configuration: Encoder > Server – Part 2

HTTP SAP	Enables/disables the transmission of SAPs to advertise the HTTP
Transmit	URL for this encoder.
RTSPU SAP	Enables/disables the transmission of SAP packets to advertise the
Transmit	RTSP URL for this encoder.
Retransmit Time	If Transmit is enabled, this setting tells the VBrick how often (in
	seconds) to send a SAP.
Time To Live	The number of hops (between routers) for which an IP packet is valid
	on the network.
Type Of Service	The TOS (Type of Service) can be configured in the IP header to
	establish SAP packet priority in the network.
IP Address	The IP address to which SAP information is sent out onto the
	network. To have a WM encoder announce the stream to a Portal
	Server, use the Portal Server IP address and default Port (9878).
Port	The port SAP to which information is sent out onto the network. To
	have a WM encoder announce the stream to a Portal Server, use the
	Portal Server IP address and default Port (9878).
RTSP URL	The RTSP URL that is advertised in RTSP SAPs.

46 © 2008 VBrick Systems, Inc.