WM Configuration

Routing Method

This selects which routing method will be used: Changes made to the

 

Routing Method will require a reset of the box.

 

• Static – Allows routes entered in the static routing table to be

 

automatically applied to the internal routing tables, after a power-

 

up.

 

• RIP Version 1 – Configures the VBrick to listen to RIP

 

announcements. Routes are dynamically added per RIP

 

specification.

 

• RIP Version 2 Broadcast – Configures the VBrick to listen to RIP

 

version 2 announcements. In this mode, RIP will perform classless

 

routing based upon subnet mask.

 

• RIP Version 2 Multicast – Configures the VBrick to listen to RIP

 

version 2 announcements that are sent in multicast mode. Both

 

broadcast and multicast announcements are processed.

Static Routing Table This table provides for user defined routing entries.

Destination Network – Enter the destination address to be manually routed.

Local Gateway IP – Enter the Gateway to be used, when the forwarding destination address is as specified.

Network Mask – Sets the network mask to be associated with the destination address.

Error – This read-only field is used to report field entry error related to the route.

VBrick WM Appliance Admin Guide

21

Page 31
Image 31
VBrick Systems VB4000, VB6000, VB5000 manual WM Configuration