VBrick Systems VB6000, VB4000, VB5000 manual Audio, Close Captioning

Frames Per Second	Measured rate in frames per second of the encoded video frames
	being created by the appliance.
Frames Encoded	Increments as compressed frames are produced by the appliance.
VFR Frames Dropped	When Configuration: Encoder > Video > Rate Control Method is
	configured for Variable Frame Rate (VFR) the encoder may drop
	frames to maintain quality and this counter will increment for each
	dropped frame. If you experience an unacceptable number of
	dropped frames your content is too difficult for your encoder
	settings. To improve VBR behavior you can increase the Video
	Buffer and/or Target Bit Rate, decrease the Resolution and/or
	Target Frame Rate.
Unexpected Frames	Increments if the encoder is forced to drop a frame for unexpected
Dropped	reasons. This status indicator is particularly important when
	encoding multiple video rates. An excessive number of frame
	drops indicates that your combination of resolutions, frame rates,
	and bit rates is too difficult for the content you are encoding. See
	Configuration: Encoder > Video on page 24 for more
	information.
Buffer Full Count	Increments when the appliance is in an overloaded condition.
	Reduce the load by lowering bit rates or reducing the number of
	RTSP and/or HTTP clients.
Audio
Bit Rate	Measured rate in bits per second of the encoded audio stream
	being created by the appliance.
Frames Encoded	Increments as compressed frames are produced by the appliance.
Frames Dropped	Increments if the encoder is forced to drop a frame for unexpected
	reasons. Contact VBrick support if your encoder reports an
	excessive number of dropped audio frames.
Buffer Full Count	Increments when the appliance is in an overloaded condition.
	Reduce the load by lowering bit rates or reducing the number of
	RTSP and/or HTTP clients.
Close Captioning

Buffer Full Count

Increments when the appliance is in an overloaded condition. Reduce the load by lowering bit rates or reducing the number of RTSP and/or HTTP clients.

ASF

Packets Created
Buffer Full Count	Increments when the appliance is in an overloaded condition.
	Reduce the load by lowering bit rates or reducing the number of
	RTSP and/or HTTP clients.

98 © 2008 VBrick Systems, Inc.