VBrick Systems VB4000, VB6000, VB5000 manual Configuration FTP File Transfer Servers

		WM Configuration
Table 13. Supported Clients with JPEG Capture
Model	JPEG Configuration	Max Clients †
Dual WM/WM encoder	JPEG disabled on both slots.	180
(with archiver)
	JPEG enabled on one slot.	140
	JPEG with deinterlace enabled on one slot.	100
	JPEG enabled on both slots.	100
	JPEG enabled on both slots; JPEG deinterlace	60
	enabled on one slot.
	JPEG with deinterlace enabled on both slots.	20
Dual WM/MPEG-2	JPEG disabled on slot1.	200
encoder (with archiver)
	JPEG enabled on slot1.	200
	JPEG with deinterlace enabled on slot1.	170

†The actual number of supported clients will generally vary slightly depending on your hardware configuration, network constraints, and other variables.

Configuration: FTP File Transfer

Configuration: FTP File Transfer > Servers

Up to eight servers are available and can be simultaneously selected. When more than one server is enabled, the appliance will transfer the newly recorded file to each enabled server. Since FTP transfer can be a slower than the recording process, it is possible to overrun the FTP queue if too many servers are enabled. Failure conditions during FTPs are noted on Status: Hard Drive > Archiver page.

VBrick WM Appliance Admin Guide 69