
Output | Description |
|
|
HTTP/RTSP | Unicast streams are provided via the VBrick internal server. In order to use |
Unicast | this feature, you first create up to three groups, each of which consists of an |
| audio stream at a selected rate and video stream at a selected rate, and |
| optionally closed captioning and metadata. Some or all of these groups are |
| Enabled on the Configuration: Encoder > Server page. The |
| then determines whether to pull a specific group from the server or to |
| negotiate with the server in order to pull the best quality stream based on |
| available network bandwidth. To allow the player/server negotiation, you can |
| open a Windows Media Player and enter the HTTP URL shown on the Server |
| page, for example http://172.22.173.10:8080/vbrickvideo1. Alternately, |
| you can request a specific group by appending a known group number, for |
| example http://172.22.173.10:8080/vbrickvideo1/group1. |
|
|
Note The WM appliance reflector feature does not currently support multiple bit rates. If the source of a push/pull to a reflector contains multiple video and/or audio streams, the reflector will reflect the entire stream with all video and audio included. This is only useful if there is a Microsoft Windows Media Server downstream from the reflector.
MBR Output Settings
The three concurrent video encoders all use the same video input. The following table shows the configuration output settings that are shared between all video encoders, and the output settings that can be configured independently for each one. See Configuration: Encoder > Video on page 24 for more details.
Table 5. Video Rate Settings
Shared Video Settings | Independent Video Settings | ||
|
|
|
|
• | Video Format | • | Resolution |
• | Video Input Type | • | Rate Control Method |
• | Video Source | • | Target Bit Rate |
• | Closed Caption | • | Target Frame Rate |
• Inserted CC Update Rate | • | Key Frame Interval | |
• | Inserted CC text | • | Smoothness |
• | Inserted CC Row | • Picture Center Quality Difference | |
• | Luminance | • | Buffer size |
•Contrast
•Saturation
•Hue
•Meta Data Enable
•Metadata String
The following table shows configuration output settings that are shared between all audio encoders, and the output settings that can be configured independently for each one. See Configuration: Encoder > Audio on page 32 for more details.
10 | © 2008 VBrick Systems, Inc. |