VBrick Systems VB6000, VB4000, VB5000 manual Configuration System Security

Number	Event Description
21	The 2.5 volts power supply failed.
22	The 2.5 volts power supply failure has cleared.
23	There is a Real Time Clock battery failure.
24	The unit has been configured to transmit and/or receive video streams beyond
	its capability.
25	Signifies the overloaded unit is recovered to normal.
26	A component on the main board failed Power On Self Test (POST).
27	The encoder card in Slot1 failed Power On Self Test (POST).
28	The encoder card in Slot1 failed Power On Self Test (POST).

Configuration: System > Security

Note If you disable Telnet, FTP, IWS, and SNMP, the only way to manage (and re-enable) these parameters is to connect a PC to the VBrick with a serial cable and use the Command Line Interface (CLI). You should never disable all the network management interfaces if you are using COM2 for serial passthrough.

External Telnet	Default = Enabled. Disabled will prevent Telnet sessions to the
Server	server.
External FTP Server	Default = Enabled. Disabled will prevent FTP sessions to the server
	including downloading to the VBrick. Note that this feature must be
	enabled to upgrade the appliance firmware using VBDownload.

80 © 2008 VBrick Systems, Inc.