VBrick Systems VB4000 Maintenance Default All Configuration, Maintenance Read/Write Configuration

Total System Up	Displays the total time that the unit has been powered up.
Time
Reset Table	Displays a history of the last 10 times the VBrick restarted. The table
	includes the start time, stop time and run time for each restart and also
	includes an indication of whether the restart was caused by a power
	loss or by an reset request from an administrator or operator.

Maintenance: Default All Configuration

This menu allows the user to default all the configuration parameters of the VBrick.

Default All	Sets all parameters except IP address, Subnet Mask, Gateway IP, User
	Names, Passwords and System Date Time.
Factory Defaults	Sets all parameters to factory defaults with the exception of System
	Date and Time.

Maintenance: Read/Write Configuration

Maintenance: Read/Write > Read From Device

The Read/Write Configuration page allows you to read configuration parameters from the VBrick to a file, as well as write configuration parameters from a file to the VBrick. The file is an .xml file and Internet Explorer is the assumed browser. Note that the VBrick appliance the .xml file is read from, and VBrick appliance the .xml file is written to, must be running the same version of code.

120 © 2008 VBrick Systems, Inc.