VBrick Systems VB6000, VB4000, VB5000 manual Passthrough State Initiator

Baud Rate	Rate of Passthrough port. Rate can be set to the following (Default =
	9600): 110, 300, 600, 1200, 2400, 3600, 4800, 7200, 9600, 14400,
	19200, 28800, 38400, 57600, 115200.
Stop Bits	Number of stop bits for Passthrough port (1 or 2).
Parity	None, Even, Odd.
RTS Control	Force OFF, Force ON or Automatic. If automatic, the control will be
	on when Passthrough is active. DTR and RTS are available for COM2
	only for those VBrick models whose last digit is 3 or higher. Under no
	conditions are RTS or DTR controls passed through end-to-end. All
	control handling is local. When using a VBrick VCC-3 or VCC-4
	camera, set this control to Automatic; when using a VBrick VCC-50i
	camera, set this control to Force ON.
DTR Control	Force OFF, Force ON or Automatic. If automatic, the control will be
	ON when Passthrough is active. Under no conditions are RTS or DTR
	controls passed through end-to-end. All control handling is local.
	When using a VBrick VCC-3 or VCC-4 camera, set this control to
	Automatic; when using a VBrick VCC-50i camera, set this control to
	Force ON.
Operational State	Describes the current status of a Passthrough connection, including
	error conditions, if any. Refer to the Network Status Section. This will
	display "Active" if in Passthrough mode.

Passthrough State: Initiator

74 © 2008 VBrick Systems, Inc.