Makita G12010R manual Cleaning Fuel Strainer, Fuel Hose Replacement, － 28－

(d)Clean the electrodes if they are dirty. Adjust the clearance to 0.03 in. (0.7-

0.8mm). Replace it with a new one if the abrasion has developed to the degree where a flat surface cannot be obtained on its projection.

If the electrodes turn black, also inspect the air cleaner.

(e)Attach and tighten the plug with the specified torque : 25 to 30 Nm (2.5 to

3.0kg-m).

(f)After checking that the contact area inside the plug cap is not corroded, connect the high-voltage cables.

Spark plug

NGK BPR5ES (CHAMPION RN11YC)

CLEANING FUEL STRAINER

Dirt and water in the fuel are removed by the fuel strainer.

(a)Remove the strainer cup and throw away water and dirt.

(b)Clean the screen and strainer cup with gasoline.

(c)Tightly fasten the cup to main body, making sure to avoid fuel leak.

FUEL HOSE REPLACEMENT

WARNING

Take extreme caution when replacing fuel hose ; gasoline is flammable.

Replace the fuel hose every 1,000 hours or every year.

If fuel hose leak is found, replace the fuel hose immediately.

－ 28－