Makita G7301R Stopping, Oil Sensor, [Caution], d[Recoil starter model], [Electric starter model]

Models: G7300R G7301R

1 42
Download 42 pages 56.13 Kb
Page 26
Image 26
STOPPING

STOPPING

(a)Turn off the power switch of the electric equipment and unplug the cord from receptacle of the generator.

(b)Turn the AC circuit breaker to the "OFF" position.

(c)Allow the engine about 3 minutes to cool down at no-load before stopping.

(d)Recoil starter model

Turn the engine switch to the position "OFF".

Electric starter model

Turn the key switch to the STOP position.

(e) Close the fuel cock.

OIL SENSOR

(a)The oil sensor detects the fall in oil level in the crankcase and automati- cally stops the engine when the oil level falls below a predetermined level.

(b)When engine has stopped automatically, switch off generator's AC circuit breaker, and check the oil level.

Refill engine oil to the upper level as instructed on page 6 and restart the engine.

(c)If the engine does not start by usual starting procedures, check the oil level.

CAUTION

Do not remove OIL SENSOR PROBE when refilling with oil. Remove oil filler cap on the opposite side of carburetor.

ON

OFF

STOP RUN

STOP

RUN

START

START

 

 

CLOSE

CLOSE

OPEN

OIL SENSOR

20

Page 26
Image 26
Makita G7301R, G7300R manuel dutilisation Stopping, Oil Sensor, [Caution], d[Recoil starter model], [Electric starter model]