Makita G7301R, G7300R manuel dutilisation Periodic Maintenance Schedule table, － 26－

Periodic Maintenance Schedule table

Maintenance Items		Every	Every				Every		Every	Every
	8 hours		50 hours				200 hours		500	1000
		(Daily)	(Weekly)				(Monthly)		hours	hours
Clean generator and check bolt	● (Daily)
and nuts
Check and refill engine oil	●	(Refill daily	up to upper			level)
Change engine oil (*Note1)	●	(Initial 20	hours)	●	(Every		100 hours)
Clean spark plug				●
Clean air cleaner				●
Replace air cleaner element								●
Clean fuel strainer								●
Clean and adjust spark plug and								●
electrodes
Replace spark plug									●
Clean spark arrester				●	(Every		100 hours)
Remove carbon from cylinder head									●
(*Note 2)
Check and adjust valve clearance									●
(*Note 2)
Clean and adjust carburetor									●
(*Note 2)
Clean and replace carbon brushes									●
Replace fuel lines										●
										(Yearly)
Overhaul engine (*Note 2)										●

*Note: 1. Initial oil change should be performed after first twenty (20) hours of operation. Thereafter change oil every hundred (100) hours. Before changing oil, check for a suitable way to dispose of old oil. Do not pour it down into sewage drains, onto garden soil or into open streams. Your local zoning or environmental regulations will give you more detailed instructions on proper disposal.

*Note: 2. As to the procedures for these items, please refer to the SERVICE MANUAL or consult your nearest Makita factory or authorized service center.

－ 26－