operator safety.
34.Do not use the tool on any materials containing asbestos.
35.Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data.
36.Always use the correct dust mask/respirator for the material and application you are working with.
37.Ensure that ventilation openings are kept clear when working in dusty conditions. If it should become necessary to clear dust, first disconnect the tool from the mains supply ( use non metallic objects ) and avoid damaging internal parts.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
FUNCTIONAL DESCRIPTION
To stop the tool from the locked position, pull the switch trigger fully, then release it.
ASSEMBLY
CAUTION:
•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.
Installing side grip (auxiliary handle)
1. Side grip
1
008949
CAUTION:
•Always be sure that the side grip is installed
securely before operation.
Screw the side grip on the tool securely.
Installing or removing abrasive disc
CAUTION:
•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.
1
2
3
4
5
6
1.Hex wrench
2.Clamp screw
3.Countersunk washer
4.Abrasive disc
5.Plastic pad
6.Spindle
Switch action
1
1. Lock button
2. Switch trigger
008948
Mount the pad onto the spindle. Fit the abrasive disc and countersunk washer on the pad and screw the clamp
2
008945
CAUTION:
•Before plugging in the tool, always check to see
that the switch trigger actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then push in the lock button.
screw clockwise into the spindle.
To tighten the clamp screw, grip the edge of the pad with your hand, then tighten the screw clockwise with a hex wrench securely.
1 | 1. Hex wrench |
2. Abrasive disc |
2
008947
6
