HP 5100LE manual Pickup roller, To reinstall

Pickup roller

1Remove the optional 250-sheet tray.

2Set the feeder upside down on the work surface.

3Press the locking tab (callout 1) on the white, side cam (callout 2), and slide the cam and the black bushing (callout 3) away from the roller (callout 4).

4Slide the roller between the two cams, rotate the roller 180 degrees, and then remove the roller from the shaft.

1

2

3

4

Figure 103. Optional 250-sheet feeder pickup roller removal (bottom of the printer)

To reinstall

Orient the pin on the roller so that it lines up with the hole in one of the side bushings. Slide the cam toward the roller until the tab snaps into place.

Q1860-90918 6 Removing and replacing parts 169

www.GovTechMedia.com