HP 5100LE manual Transfer-roller assembly removal 1

Transfer-roller assembly

CAUTION		Never touch the transfer roller with your fingers. Wear unpowdered latex gloves when you remove
		and replace the transfer roller. Roll the transfer roller into a clean sheet of paper to protect it after
		removal.
	1		Face the front of the printer, open the top cover, and lift the small green handle on the right
			side of the registration assembly to expose the transfer guide (callout 1— the metal plate that
			rests against the transfer roller).
	2		While holding the plate, remove the two self-tapping screws (callout 2) and then carefully lift
			out the transfer guide.

2

1

Figure 56.Transfer-roller assembly removal (1 of 3)

128 Removing and replacing parts Q1860-90918

www.GovTechMedia.com