HP 5100LE manual Paper-size spring assembly

Paper-size spring assembly

1Complete steps 1 through 6 of the feeder control PCA removal procedure (see page 171).

2Turn the feeder assembly over so that it is face-up on the work surface.

3Remove the two screws (callout 1) that secure the paper size switch PCA to the frame.

1

Figure 109. Optional 250-sheet feeder paper-size spring assembly removal (1 of 2)

4Carefully lower the PCA down to the work surface to gain access to the paper-size spring assembly.

5Remove the screw (callout 2) that secures the paper-size spring to the frame and lift the spring from the frame.

2

Figure 110. Optional 250-sheet feeder paper-size spring assembly removal (2 of 2)

Q1860-90918 6 Removing and replacing parts 173

www.GovTechMedia.com