
Power supply system
Ac/dc power distribution
The ac line voltage for the printer is applied through the main switch (SW101) and supplied to the
+3.4 Vdc is supplied to ICs on the formatter, the dc controller PCA, and the BD PCA. +5 Vdc
is supplied to the laser driver PCA and sensors.
+24 Vdc is supplied to the
main motor, the exhaust fan, the scanner motor, the clutches, and the solenoids.
+24 Vdc is divided into +24 Vdr, which stops when the top cover is opened and SW401 on
the
Figure 10.Low-voltage power supply circuit
72 Functional information |
www.GovTechMedia.com