HP 5100LE manual

4Remove the two M3x8 machine screws (callout 1) that are in the center of the printer and under the registration assembly roller guide.

1

Figure 76. Paper-feed roller assembly removal (2 of 3, location of two screws inside the printer)

5Remove the paper tray, and tilt the printer back, with the front facing up.

6Remove the four self-tapping screws (callout 2) that hold the paper-feed roller assembly to the chassis. They are located on the bottom of the printer.

2

Figure 77. Paper-feed roller assembly removal (3 of 3, bottom view of printer)

7Remove the paper-feed roller assembly from the chassis, carefully feeding the cable through the hole in the chassis.

Q1860-90918 6 Removing and replacing parts 145

www.GovTechMedia.com